| Model | NXO-2-T1(T2)
| NXO-3-T1(T2) |
Circulation
| forced hot-air circulation with 4" exhaust outlet
|
Power Source
| AC 220V 3 Ø 60/50 Hz
|
Consumption Power
| 6(T1).9(T2) KVA
| 7.5(T1).10(T2) KVA
|
Performance
| Temperature Range
| T1 : 60 ~ 250°C ; T2 : 60 ~ 350°C
|
Temperature Stability
| ± 0.5 °C
|
Temperature Uniformity
| ± 1 °C at 100 °C ± 4 °C at 300 °C
± 2 °C at 200 °C ± 5 °C at 350 °C
± 3 °C at 250 °C
|
Warm - Up Time
| ambient temp. to 250 °C 35min
ambient temp. to 350 °C 60min
|
Material
| Interior Material
| SUS 304# mirror finish stainless steel
|
Exterior Material
| SS 41# steel with baked paint
|
Heater
| Ni-Cr alloy
|
Insulation
| 48K mineral Wool
|
| Inert Gas Lead-in- Device | i) Leakage In-Gas | N2, CO2 (normal gaseous) |
ii) Gas Preasure
| input end Max. 10kg/cm²G; output end with pressure adjusting device |
iii) Flow Volume
| max. 25/min. (at max flow volume) |
| iv) Chamber Gauge | 3m/m Hg (at max. flow volume).
|
v) Duct
| brass; heat resistance up to 180°C |
vi) Pressure Guage
| floating type
|
vii) Release Valve
| action at pressure 0.5kg/cm²
|
Oxygen Containing Volume | Below 22PPM when finish inflation
|
Safety Devices
| i) Leakage Circuit Breaker | Protection for leakage; short circuit and over current. (sensitivity 30mA)
|
ii) Fuse
| rapid sensing with display; for heater and system protection.
|
iii) Blowing Motor Protection
| over - current protection (settable type)
|
| iv) over - Temp Prevention | H. alarm protection and liquid expansion type auxiliary protection.
|
v) Trouble display
| separately display for every trouble
|
Dimension
| Inside Dimensions (cm)
| 60 x 60 x 60 | 65 x 50 x 90 |
Outside Dimensions (cm)
| 92 x 80 x 133(T1)/145(T2)
| 92 x 70 x 162(T1)/174(T2) |
Interior Capacity
| 216L
| 270L |
CUSTOMERS SERVICE
