Model | NXO-2-T1(T2) | NXO-3-T1(T2) | |
Circulation | forced hot-air circulation with 4" exhaust outlet | ||
Power Source | AC 220V 3 Ø 60/50 Hz | ||
Consumption Power | 6(T1).9(T2) KVA | 7.5(T1).10(T2) KVA | |
Performance | Temperature Range | T1 : 60 ~ 250°C ; T2 : 60 ~ 350°C | |
Temperature Stability | ± 0.5 °C | ||
Temperature Uniformity |
± 1 °C at 100 °C ± 4 °C at 300 °C ± 2 °C at 200 °C ± 5 °C at 350 °C ± 3 °C at 250 °C |
||
Warm - Up Time |
ambient temp. to 250 °C 35min ambient temp. to 350 °C 60min |
||
Material | Interior Material | SUS 304# mirror finish stainless steel | |
Exterior Material | SS 41# steel with baked paint | ||
Heater | Ni-Cr alloy | ||
Insulation | 48K mineral Wool | ||
Inert Gas Lead-in- Device | i) Leakage In-Gas | N2, CO2 (normal gaseous) | |
ii) Gas Preasure | input end Max. 10kg/cm2G; output end with pressure adjusting device | ||
iii) Flow Volume | max. 25/min. (at max flow volume) | ||
iv) Chamber Gauge | 3m/m Hg (at max. flow volume). | ||
v) Duct | brass; heat resistance up to 180°C | ||
vi) Pressure Guage | floating type | ||
vii) Release Valve | action at pressure 0.5kg/cm2 | ||
Oxygen Containing Volume | Below 22PPM when finish inflation | ||
Safety Devices | i) Leakage Circuit Breaker | Protection for leakage; short circuit and over current. (sensitivity 30mA) | |
ii) Fuse | rapid sensing with display; for heater and system protection. | ||
iii) Blowing Motor Protection | over - current protection (settable type) | ||
iv) over - Temp Prevention | H. alarm protection and liquid expansion type auxiliary protection. | ||
v) Trouble display | separately display for every trouble | ||
Dimension | Inside Dimensions (cm) | 60 x 60 x 60 | 65 x 50 x 90 |
Outside Dimensions (cm) | 92 x 80 x 133(T1)/145(T2) | 92 x 70 x 162(T1)/174(T2) | |
Interior Capacity | 216L | 270L |
FEATURES:
- Make high temperature baking environment of low oxygen containing and oxidation-free come true.
- Electromagnetic door lock; easy to open/close; good in appearance; no particle befall.
- Interior cabinet use stainless steel plate of mirror finish with arc corner; all seams are welded by argon arc; smooth surface, easy mto clean; meet the requirement ofm completely sealed and oxidation-free.
- SUS 304# long shaft motor sealed with high temperature resist bearing. (for 350°C models a shaft cooling system is added.)
- Professional designed extra long-life P.T.M.R. (Power Thyristor Module Regulator) heater driver. (or linear heater driver A.P.R. can be chosen)
Inquiry - NXO Series